Level Sensors
We are manufacturer and exporters of Level Sensors like RF Liquid Level Sensors, RF Solid Level Sensors etc.
RF
Liquid Level Sensors and RF Solid Level Sensors
Transfer
Liquid Tank
|
BIN/SILO |
|
General Application of Level Sensors :
EIP Level Sensors designed to provide accurate and reliable level
information of Solids (Powder & Lumps), Liquids and Slurry applications
for point level detection in storage Bins, Silos, Hoppers, Tanks, Chutes and
any other vessels / tanks where material is stored, processed and discharged
even at high temperature / pressure/corrosive applications.
How Eip Level Sensors Work :
EIP Point level sensors includes an electronic unit and a sensing probe,
connected by a co-axial cable. The electronic unit consist of an
oscillators, a detector and output relay which is controlled by the
detector. The probe contains an active and shield section insulated from
each other and from the vessel ground as shown.
Function of Level Sensors :
The oscillator generates low-power RF signal which is used to provide
signals equal in frequency phase and amplitude to both, active section and
shield section of the probe. The signal applied to the shield is held
constant by use of compensating amplifier. The detector is then used to
compare the fixed shield signal with active signal which varies with the
dielectric constant of the material in contact with the probe. Difference in
the signals compared by the detector cause the output relay to activate. The
contacts of the output relay to when activated are used to indicate the
presence or absence of material in the vessel at the probe level.
- Fly ash
- Salt
- Cement
- Silicone carbide
- Urea
- Coal tar
- Lime
- Pigments
- Soda ash
- Bauxite
- Coal powder
- Fruit pulp
- Coal lump
- Iron ore
- Alumna
|
- Iron chromate
- Wheat & other food
- Sodium nitrate
- Grains
- Kaolin clay
- Detergents
- Zinc oxide
- Talc
- Strach
- Polyester
- Sewage sludge
- Plastic pellets
- Slurris
- Pvc resin
|
- Clay
- Glass batch
- Aluminum oxide
- Silica sand
- Lead oxide
- Oils
- Glass cutlet
- Silica flour
- Borax
- Sugar
- Earth
- And many more
|
| Electric unit specifications: |
Probe Specification |
- Circuitry: Solid State
- Supply voltage: 240/220/110/24 VAC 50/60 Hz.
- Output: DPDT, Relay output, Rated 5 Amps @ 240VAC
- Calibration: Only one calibration adjustment.
- Fail safe: Selectable to high or low level.
- Local Indication: LED-Normal, Alarm, Probe Healthy
- Electronic: Remote from probe-unto 100 feet.
- Enclosure; IP-66 Protection
|
- Internal materials: Stainless steel with PTFE or Ceramic.
- Enclosure: IP-66 Protection
- Vessel temperature: To customer specification
- Insertion Length: To suit application requirement
- Process Connection: As specify
- No electronics at probe & No moving parts
|
Eip Enviro Controls :
Eip Enviro has steadily developed a world-wide reputation for designing /
Supply rugged, accurate and reliable Level control system specially for
Solids& Liquids during past many years.
In this area, experience and technological excellence are the keys to
successful installations. Our highly skilled Engineers and Customer Service
Professionals ensure that every level control system supplied by EIP ENVIRO
funtions well and meets the desired standards.
Each level control we supply, is based on our latest newly developed
technology and have simple installation and provide trouble free operation
year after year to suit in any Industrial Environment.
Level controls supplied by EIP ENVIRO have installed and tested in a
variety of typical applications at hundreds of Industries. This rigorous
testing in the field demonstrate fulfilment of our commitment to achieve new
heights in the concept of level controls world-wide.
